Stainless Steel Solenoid Valve

Type “KR” Full Port

Normally Open – 1/2″ to 3″ Pipe Size

Fluid Temp: -350°F to 400°F | Max. Static Pressure – 300 PSI
(Except valves listed for 500 PSI)

No Differential Pressure Required to Open

Operation

This solenoid valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.

Application

To control the flow of Corrosive Fluids, Deionized Water, Condensate, Ammonias, Vegetable Oils, Fuel Oils, Cryogenics**, Flammable Liquids. Cryogenic fluids include liquid oxygen (-297°F), liquid argon (-303°F) and liquid nitrogen (-320°F). This solenoid valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.

**Cleaning

Cryogenic valves are degreased and cleaned to keep them free of moisture
Oxygen valves are also “black light” tested.

Get a Quick Quote

Pipe Size Inches

Max. Diff. PSI

Clear

End Connection
Fluid
Voltage
Enclosure
Flow Rate
Optional Features
Bottom Mount
Additional Options	HF-Hum Free DN-Din Connector NP-Nickel Plating LT-Leak Tight PT-Pilot Tap

Specifications

Pipe Size Inches	Max. Diff. PSI	Type No.	Watts AC	Amps Hold 120-60	Amps Inrush 120-60	Watts DC	Ship Wt. Lbs.	Dimension In Inches
								A	B	C	D NPT	D (Flanged)
								A	B	C	D NPT	150#	300#
1/2	110	14KR42	25	0.5	1.5	18	7	8-1/8	7	2-7/8	3-1/4	6
	200	14KR32	25	0.5	1.5	18	7	8-1/8	7	2-7/8		6
	300	29KR52	45	1.0	2.7	23	10	8	6-7/8	3-1/2			6-1/2
	500	E29KR62	45	1.0	2.7	23	15	8	6-7/8	4			6-1/2
3/4	110	14KR43	25	0.5	1.6	18	8	8-1/4	7-1/8	2-7/8	3-1/2	6
	200	29KR33	45	1.0	2.9	23	12	9-1/4	8-1/8	3-1/2		6
	300	129KR53	65	1.5	4.3	33	12			3-1/2			6-1/2
	500	E129KR63	65	1.5	4.3	33	17			4			6-1/2
1	110	16KR44	25	0.5	1.8	18	10	9-1/8	7-3/4	3-1/4	4-1/8	5
	200	31KR34	45	1.0	3.0	23	14	10	8-5/8	3-1/2		5
	300	131KR54	65	1.5	4.5	33	14			3-1/2			6-1/2
	500	E131KR64	65	1.5	4.5	33	20			4			6-1/2
1-1/2	115	35KR46	45	1.0	3.8	23	18	11-3/8	9-1/2	4	4-7/8	6-1/2
	200	41KR36	60	1.7	6.5	35	22	11-5/8	9-3/4	4-1/2		6-1/2
	300	141KR56	85	3.5	9.7	45							7-1/2
	500	141KR66	85	3.5	9.7	45							7-1/2
2	100	36KR47	45	1.0	4.2	23	27	12-3/8	10-1/8	5-3/8	6	8
	200	42KR37	60	1.7	7.3	35	32	12-5/8	10-3/8			8
	300	42KR57	60	1.7	7.3	35							9
	500	142KR67	85	3.5	11.0	45							9
3	100	44KR49F1	60	1.7	8.8	35	69	14-3/8	11-1/8	6-5/8	N/A	9-1/2	N/A
	200	44KR39F1	60	1.7	8.8	35	69					9-1/2	N/A
	300	144KR59F3	85	3.5	13.0	45	82					N/A	12-1/2

Shipping Weights above apply to Threaded Ends Only (except 3″ which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3″ STAINLESS STEEL VALVES ARE SUPPLIED WITH FLANGED ENDS ONLY

Construction

(*Wetted parts – No Copper Bearing Alloys in contact with fluid)
*Valve Body – 304 Stainless Steel Globe Pattern – NPT ends
(For Flanged Ends go to Optional Features page)
*Piston – 303 Stainless Steel
Coil Enclosure – Malleable or Cast Iron,1/2 ” NPS conduit conn.
*Plunger – 430 Stainless Steel
*Pilot Valve – 303 Stainless Steel
*Bonnet Tube – 304 Stainless Steel
*Spring – Inconel
*Body Seal – Non Asbestos Gasket
*Orifice Seal – Glass Filled PTFE
*AC Shading Coil – Silver
*Stem Pin – Inconel
Coil – Encapsulated Class H, 18” leads

Literature

Download Data Sheet